INDUCTION SEALER

  >>  
  >>  

SPECIFICATION

Cap bottles and containers securely and rapidly. These compact yet powerful units are designed to securely seal plastic caps onto bottles. At SAMPACK® we offer both manual and semi automatic models. The Pneumatic Manual Capper provides a smoother and comfortable torque control. The capping process is extremely simple: The manual capper can be hanged from roof or be held by hand. The operator places caps on bottles manually; after pressing the capper down on the cap the unit is activated while holding down the bottle or container. The unit will stall or disengage its clutch when the target torque is reached.

The Semi Automatic Capping Machine is used by the beverage, food, cosmetic, agricultural, pharmaceutical and chemical industries, among others.

They are completely self-contained and require only 220V of electrical current to operate. Its operation is simple, as follows:

 

1) Place Cap On Bottle;

 

2) Place Bottle Into Machine;

 

3) Extract Capped Bottle.

 


 

 

Manual Induction Sealing Machine

  • For use on Plastic and/or Glass containers with Flat Threaded Caps

  • Hand-held Operation

  • Extremely Simple to Use

  • Easily Relocated to where its needed Packaging Area

  • Optimal use for small to medium productions or as backup to larger continuous systems

  • Speed: Aprox 20 - 40 cpm (Depending on Operator Speed and Container Characteristics)

  • Maximum Cap Diameter (60 - 130 mm)

  • Maximum distance between the cap surface and the top of container (3 mm)

  • Horn Power: 600 Watts

  • Cycle Actuation: Thumb Switch

  • Control Panel:

  • Master ON/OFF Switch

  • Fuse Protection

  • Current Electrical Charge Digital Display

  • Sealing Time Digital Display (Seconds & Tens of Sec)

  • Automatic Overheat Protection Fuse and Alarm./Light with Automatic Cool down Reset Feature

  • Automatic Over Current Alarm/Light Engages if Excessive Distance Between Horn and Substrate is Being Applied

Control Panel

  • Master ON/OFF Switch Sealing Time Digital Display (Seconds & Tens of Sec)

  • Fuse Protection Current Electrical Charge Digital Display

  • Automatic Overheat Protection Fuse and Alarm./Light with Automatic Cool down Reset Feature

  • Automatic Over Current Alarm/Light â Engages if Excessive Distance Between Horn and Substrate is Being Applied

Other Specifications

  • Electrical: 220V/50-60Hz

  • Machine Weight: (5 Kg)

  • Control Unit Size: (340 x 290 x 150 mm H)

  • Packaged Dimensions: 21 inches (533mm0 x 19 inches (483mm) x 10 inches (254mm)

  • Packaged Weight: 15 Lbs (7 kg)